Vaughan Forklift Training Schools

Vaughan Forklift Training Schools - Have A Safe And Efficient Work Place With Our Forklift Training Schools

Are you searching for work as a forklift driver? Our regulatory-compliant mobile equipment operator training provides instruction in kinds of forklifts, pre-shift check, fuel kinds and dealing with fuels, and safe use of a lift truck. Hands-on, practical training helps those participating in acquiring fundamental operational skills. Course content comprises current regulations governing the utilization of lift trucks. Our proven forklift Schools are designed to offer training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

Do not lower or raise the fork when the forklift is traveling. A load must not extend over the backrest due to the danger of the load sliding back toward the operator. Check for overhead obstructions and make certain there is adequate clearance before lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it slightly back.

While the load is raised the forklift would be less stable. Make sure that no pedestrians cross below the elevated fork. The operator must never leave the forklift while the load is lifted.

While handling pallets, forks should be level and high enough to go into the pallet and extend all the way underneath the load. The width of the forks must provide even weight distribution.

Before unloading or loading the truck, set the brakes and chock the wheels. Floors should be strong enough to support the weight of the load and the forklift combined. Fixed jacks could be installed to be able to support a semi-trailer that is not attached to a tractor. The height of the entrance door must clear the height of the forklift by a minimum of 5 cm. Edges of ramps, docks and rail cars should be marked and avoid them.

Click to Download the pdf