Aerial Lifts

Aerial Lift Training Vaughan - Aerial lift trucks can accommodate numerous tasks involving high and tough reaching places. Sometimes used to perform daily upkeep in buildings with high ceilings, prune tree branches, elevate heavy shelving units or repair phone lines. A ladder could also be used for many of the aforementioned projects, although aerial platform lifts offer more security and stability when properly used.

There are a number of different designs of aerial lift trucks existing, each being capable of performing moderately unique tasks. Painters will often use a scissor lift platform, which can be utilized to reach the 2nd story of buildings. The scissor aerial jacks use criss-cross braces to stretch out and lengthen upwards. There is a table attached to the top of the braces that rises simultaneously as the criss-cross braces lift.

Cherry pickers and bucket lift trucks are another kind of the aerial hoist. Typically, they contain a bucket at the end of an extended arm and as the arm unfolds, the attached bucket platform rises. Platform lifts utilize a pronged arm that rises upwards as the lever is moved. Boom lifts have a hydraulic arm which extends outward and hoists the platform. Every one of these aerial lift trucks call for special training to operate.

Training programs offered through Occupational Safety & Health Association, known also as OSHA, cover safety procedures, system operation, maintenance and inspection and machine load capacities. Successful completion of these education programs earns a special certified license. Only properly qualified individuals who have OSHA operating licenses should operate aerial lift trucks. The Occupational Safety & Health Organization has developed guidelines to uphold safety and prevent injury while utilizing aerial platform lifts. Common sense rules such as not utilizing this machine to give rides and making sure all tires on aerial lifts are braced so as to prevent machine tipping are referred to within the rules.

Sadly, data reveal that more than 20 aerial hoist operators pass away each year when operating and almost ten percent of those are commercial painters. The majority of these incidents were triggered by inadequate tie bracing, therefore many of these might have been prevented. Operators should make certain that all wheels are locked and braces as a critical safety precaution to prevent the instrument from toppling over.

Additional suggestions involve marking the surrounding area of the machine in an obvious way to protect passers-by and to guarantee they do not approach too close to the operating machine. It is crucial to ensure that there are also 10 feet of clearance between any utility lines and the aerial hoist. Operators of this apparatus are also highly recommended to always wear the proper safety harness while up in the air.

Click to Download the pdf